Milling Made Easy

Milling Made Easy

Accessories (+VAT if required).

  1. MANUAL MILL BEAM EXTENSION Per 1m. Includes insert connectors and round tube with clamps. 1m section of beam. 3 inserts, 12 screws, alloy tube, 2 clamps. €400 EURO.

  2. AUTO MILL BEAM EXTENSION Per 1m. Includes insert connectors and round tube with clamps. 1m section of beam. 4 inserts, 16 screws, alloy tube, 2 clamps. €540 EURO.

  3. RADIAL MASTER BEAM EXTENSION Per 1m. Includes insert connectors, round tube with clamps, trailer extensions. 1m section of beam. 4 inserts, 16 screws, alloy tube, 2 clamps. Trailer. €1,000 EURO.

  4. GLADIATOR  BEAM EXTENSION Per 1m. Includes insert connectors, round tube.1m section of beam. Tube. €800 EURO.

  5. TOW TRAILER Transport trailer to fit all mills. Includes dolly trailer and hold down clamps to connect to your sawmill for easy farm transport. €2,500 EURO.

  6. DEDICATED SLABBER SAWMILL Complete dedicated slabbing system to cut wide slabs (61" x 8"). 4.2m (13.7 feet) cut length in standard configuration or 6.2m with the extension fitted. Includes: double end taper sizing, 2  x RX27 chain loops and sharpener. GX390V (honda 13hp) standard. €8,900 EURO.

  7. DEDICATED SLABBER CARRIAGE Dedicated slabbing system to cut wide slabs (61" x 8"). Comes as a rolling carriage only. Includes: 2  x RX27 chain loops and sharpener. GX390V (honda 13hp) standard. €6,050 EURO.

  8. SLABBER ATTACHMENT Slabbing bar to attach to your sawmill. Fits in place of your circular blade (50" x 8". Includes: 2  x RX27 chain loops and oiler system. €2,300 EURO.

  9. SLABBER CRADLE ONLY Trolley to fit to your existing beam. Can sit at the other end of the mill. Fits your standard Alaskan kit. Trolley only with remote throttle. €900 EURO.

  10. PLANER BLADE Planer blade for re-surfacing slabs and beams. Process is done after your product has dried. Provides a finished result. 6 tooth planer blade with 6 extra removable carbide tips. €1,200 EURO.

  11. CANTHOOK Handy tool for rolling logs. 1 x Canthook €200 EURO.

  12. PUSH BUTTON 12V CONTROL Fits all automated Warrior models. Bush button sizing for horizontal and vertical movement. Control station with extra 12v battery. Lift and horizontal motor and gearbox kit. €3,000 EURO.

  13. RADIAL MASTER LEG EXTENSIONS Extended legs to allow the Radial Master frame to cantilever over very large logs to be milled seperately to the turning system. 2 x extension legs. €1,000 EURO.

  14. RADIAL MASTER GENERATOR Honda 3kva generator for mobile operations. €3,400 EURO.

  15. RETIPPING JIG Re-tipping jig to assist in welding on sawblade tips. Holds the tooth while it is welded to the blade. Re-tipping jig and 20 extra tips. €400 EURO.

  16. JOCKEY KIT Jockey frame and wheels to fit under your mill for easy setup. €260 EURO.

  17. LOG DOGS Attaches to your bunks, made of alloy - very effective. €400 EURO.

  18. 6" SAWBLADE 3 tooth, 4.75mm kerf. 1 x blade. €250 EURO.

  19. 8" SAWBLADE 4 tooth, 5.7mm kerf. 1 x blade. €400 EURO.

  20. 10" SAWBLADE 4 tooth, 6.1mm kerf. 1 x blade. €550 EURO.

  21. 12" SAWBLADE 3 tooth, 6.5mm kerf. 1 x blade. €1,050 EURO.

  22. 6" SAW TIP Standard 4.75mm kerf. 1 x tip. €4.5 EURO.

  23. 8" SAW TIP Standard 5.7mm kerf. 1 x tip. €4.5 EURO.

  24. 10" SAW TIP Standard 6.1mm kerf. 1 x tip. €5.5 EURO.

  25. 12" SAW TIP Standard 6.5mm kerf. 1 x tip. €6.5 EURO.

  26. PLANER BLADE SAW TIP Standard planer blade carbide. 1 x tip. €13 EURO.